 Printable Form Directions:
Click on disired custom brush printable form. Print & fill out correct information you are requesting. Fax back to us (262) 547-3927 and we will evaluate your request and get back to you as soon as possible.
Interactive Form Directions:
Click on desired custom brush intereactive form. Fill form out online and click submit. |
Printable Form | Twisted in Wire Brushes
When using twisted wire brushes remember, it is the tips of the wire filament that do the work. Excessive pressure bends the filament. This results in excessive flexing, which causes premature breakage and reduces brush life. When using twisted brushes with wire bristles, rotate the brush as if tightening the brush construction. Most Schaefer brushes are made to be rotated clockwise when the brush points away from the user. |
Interactive Form |
Printable Form | Metal Back Strip Brushes
Metal back strip brush products can be found in industries performing task both simple and complex. The brushes can be simple in form such as straight strip or formed.
Strip backing sizes range from industry standards #3 to #10. Most strip is available in galvanized or stainless steel.
|
Interactive Form |
Printable Form | Staple Set
Staple Set products are very common in both industrial and consumer settings. With their wide range of uses and shapes, they fulfill a vast array of task.
Hand Drawn
Hand drawn products are typically used in more aggressive applications where a very secure mounting of the bristle is essential. |
Interactive Form |
Printable Form | Cylinder Brush (Wound Loose Coil)
Once the metal back strip brush is formed, the strip is attached to a core, shaft or tube and wound under tension to make a coiled cylinder brush. The metal back strip brush can be wound with a right or left hand spiral and specific pitch to determine brush density. (Open wound for a less dense brush and closed wound for a full brush.) |
 Interactive Form |
Printable Form | Cylinder Brush (Wound on Core)
The finished coil can be assembled to a core. The core can be hollow with collars including, collars with set screws, single keyways, double keyways, and isoplast ends for drive pins |
Interactive Form |
Printable Form | Cylinder Brush (Wound on Shaft)
The finished coil can be assembled to a shaft or unassembled for mounting to a customer’s shaft in the field. The cylinder brush may be welded onto this shaft as well. |
 Interactive Form |
Printable Form | Cylinder Brush (Wound on Core with Shaft)
The finished coil can be assembled to a core on a shaft. The brush core can be hollow with stub shafts pressed and welded into both ends of the core. (These shaft stubs may have single or double shaft heads.) You can also choose a solid core, where the brush would be wound directly onto the shaft. Or you may choose the hollow core supplied with removable through shaft. |
Interactive Form |
Printable Form | Cylinder Brush (Staple Set Brush Pattern)
Staple set brushes are constructed with a series of individual tufts. The tufts of filament are inserted into a core which can be made of various materials. Staple set cylinders can have a variety of brush patterns. The function of the brush application combined with the fill material size determines the density and size of the tuft holes. |
Interactive Form |
 Printable Form | Flask Cleaning Brushes
These brushes are desgined to provide superior cleaning of the cope and drag during the punch out operation. These brushes will be made to bolt directly to the punch out plate of your existing equipment. |
 Interactive Form |
|
