We are pleased to introduce our new 2008, 23’ PUMPOUT BOAT. This is our third generation new mold. Built and designed from our nine years of experiences building PUMPOUT boats, Work boats, and Patrol boats. Our boats are built for safety, simplicity, and stability. There is no wood in our boats, not in the hull, not in the deck, not in the transom.
MODIFIED V HULL DESIGN
Our PUMPOUT hull bottom is concave not convex like most hulls. This allows for maximum stability, and ease of handling. Our boat because of its design will not yaw in a following sea. The hull is constructed with a combination of hand laid woven, roving, and gun roving. All fiberglass is “E” glass and the resin is thermo set polyester. The gelcoat is ISO NPG thermo set gelcoat, normally 1.5” thick. Our boat has a 10-degree dead rise at the stern, which allow the boat to plane quickly. The hull transom is a composite laminate 2” thick, and 1” fiberglass a total of 3” thick. There is no wood in the transom.
STRINGER SYSTEM
Our stringer system is a U channel all fiberglass state of the art system. There is no wood in our stringer system.
Deck and floor
The deck is a combination of hand laid woven, roving, and gun roving. Fiberglass “E” glass applied and the resin is thermostat gelcoat (white). Deck has a 12” step up in the bow area that is 48” long. It includes two forward large stowage areas with fiberglass hatches. The deck is free from any pumps, vents, or pipes of any kind leaving much-needed extra workspace, and NO trip hazards. Our floor is fiberglass composite, not wood like other boats there is NO wood in our deck, floor or in our boat. The deck is finished with non-skid on horizontal surfaces. Our deck is self-bailing at all times; weather containment cell is full or empty.
FOAMED FLOTATION
Two-part thermostat foam is injected between the floor and hull in areas not occupied by tankage and other equipment.
QUALITY GELCOAT
Only storm and blister resistant gelcoats are used to form the skin of each PUMPOUT boat, a wide variety of colors are available. White is our standard color included in the quote price; other color choices would be extra cost
CONTAINMENT CEL
A built in fiberglass holding tank below the water line, is a standard feature on our 23’ PUMPOUT BOAT. The containment cell has 5 layers of fiberglass that include 4 layers of 24 oz. Cloth. Our containment cell has 4 baffles. The Edson pump that runs the sewage tank is located completely under the center console. In addition, under the console is the intake, and discharge pipes. Leaving the entire deck free to any trip hazards and much needed additional working space. It is an Edson 286-EB-40 diaphrame pump; the vent is located outside the starboard hull. The tank has an alarm that sounds when tank is full.
23' HARDTOP PUMPOUT BOAT STANDARD FEATURES:
White hull
High-density foam cored transom
Integral foam filled grid stringer system
Foam cored deck
Self-bailing cockpit
In Floor Storage
High impact rubrail w/ insert
Opening ports w/ screens (2)
Locking cabin door
Stainless steel anchor roller w/ hawse pipe & chain lock
Stainless steel ½” bow & stern eyes (3)
Stainless steel 10” bow & stern cleats (3)
Stainless steel 8” pop-up spring line cleats (2)
Stainless steel 6” bow chocks (2)
13” stainless steel steering wheel
Hydraulic steering system
Custom powder coated window frame (white)
Venting windshield & sliding side windows
Cored FRP Hard Top w/ dome light & hand rails
Crosslink poly fuel tank w/ shut-off valve
Stainless steel fuel fill deck plate
Pedestal helm seats P&S
Helm seat storage boxes
Dual battery system
DC electrical panel 12 gang
DC power plug at helm
Running lights
Cockpit courtesy lights (2)
Automatic bilge pumps (2)
Trim tabs
SPECIFICATIONS
LOA 22’-10”
Beam (max) 8’-6”
Draft (hull) 1’-4”
Deadrise (transom) 10 degrees (std) & 21 (opt)
Dry Weight 3750 lbs
Power (max) 225 hp
Headroom (hard top) 6’-4”
Fuel Capacity 124 gal
(TOTAL = Fuel + Holding)
Options:
Deep vee hull (21 degree)
Hull color-850.00
FRP aft bulkhead w/ aluminum locking door & (2) windows
Coated aluminum engine bracket
Bow rail
Aft canvas enclosure
WARRANTY
We offer a five (5) year warranty on the hull and a (5) year warranty in the holding tank.
