DECORATIVE QUARTZ
Double Broadcast Decorative Quartz Single Broadcast Decorative Quartz
Click on images to enlarge
Installation Process:    Click here to see the surface preparation process for residential projects. Click here to see the surface preparation process for commercial/industrial projects.
Double Broadcast Decorative Quartz System (~ 3/32" to ~ 1/8”) First Coat: • Apply a clear binder coat of 100% solids epoxy to floor surface (~ 160 sq. ft. per gal.) • While the binder coat is still wet, broadcast the colored quartz to rejection • Allow epoxy coat to cure for about 24 hours • Sweep off any loose quartz Second Coat: • Apply a clear binder coat of 100% solids epoxy to floor surface (~ 120 sq. ft. per gal.) • While the binder coat is still wet, broadcast the colored quartz to rejection • Allow epoxy coat to cure for about 24 hours • Sweep off and vacuum any loose quartz Third Coat: • Apply a coat of UV resistant, 100% solids epoxy (80 to 120 sq. ft. per gal.) or high solids polyurethane (250 to 300 sq. ft. per gal.) to floor surface • Allow to cure for about 24 hours • Lightly sand (either mechanically or by hand) the floor to remove any foreign debris trapped in the drying process and smooth the surface (if necessary) Fourth Coat (Optional to create a smoother profile): • Apply a coat of UV resistant polyurethane with aluminum oxide (added for slip resistance) to floor surface
Single Broadcast Decorative Quartz System (~ 1/16”) First Coat: • Apply deep penetrating epoxy primer to floor surface (250 to 350 sq. ft. per gal.), primer color will be tinted to match the color tone of the quartz blend selected • Allow primer to cure for about 1 to 24 hours • Lightly sand (either mechanically or by hand) the floor to remove any foreign debris trapped in the drying process and smooth the surface (if necessary) Second Coat: • Apply a clear binder coat of 100% solids epoxy to floor surface (~ 160 sq. ft. per gal.) • While the binder coat is still wet, broadcast the colored quartz to rejection • Allow to cure for about 24 hours • Sweep off and vacuum any loose quartz Third Coat: • Apply a coat of UV resistant, 100% solids epoxy (80 to 120 sq. ft. per gal.) or high solids polyurethane (250 to 300 sq. ft. per gal.) to floor surface • Allow to cure for about 24 hours Fourth Coat (Optional to create smoother profile): • Apply a coat of UV resistant polyurethane with aluminum oxide (added for slip resistance) to floor surface (250 to 300 sq. ft. per gal.)
Ervin Specialty Coatings  |  Cottonwood, AZ  |  (928) 649-9338  | ROC218645  ROC220641