E. L. Foust Co., Inc.
Research And Reliability In Air Purification Since 1974

GreenPeople Seal of Approval

Air Purifiers          Water FiltersEverpure  MultiPure  Hurley          HVAC Filters:  Chemical Control  Particle Control
Home/Environment Products:  AFM    Building/Construction    ECOS   Face Masks    Vacuums    Solutions-4-You    Magick Botanical

 

Product ID: EV-9270-70      ALL Everpure products are being submitted for California performance standards. No claims for performance are available at this time.

H-300 Water Filter system, manufactured by Everpure. 

Features
- Finely polishes treated water to premium quality for drinking and cooking.
- Reduces chlorine taste and odor and chloramines.
- Reduces dirt, rust, asbestos fibers, and other particulates such as oxidized iron, manganese, and sulfides. - As tested by Everpure.
- Reduces parasitic protozoan cysts such as Giardia, Entamoeba, and Cryptosporidium.
- Adsorbs common earthy, moldy, fishy tastes and odors.
- Reduces lead.
- Effectively reduces Volatile Organic Chemicals (VOCs), including Trihalomethanes (THMs).
- KDF Media reduces limescale buildup in water-using appliances - As tested by KDF Fluid Treatment, Inc.
- KDF Media provides bacteriostatic control - As tested by KDF Fluid Treatment, Inc.

Operating Specifications
- Capacity: 300 gallons (1,135 L).
- Pressure requirement: 10-125 psi (0.7 - 8.6 bar), non-shock.
- Temperature: 35-100 degrees F (2-38 degrees C).
- Flow Rate: 0.5 gpm (1.9 Lpm).

General Installation Requirements
- Space required: 5 x 5 x 20 in. including 2-1/2 inches of clear space under unit for cartridge change.
- Install vertically with cartridge hanging down.
- Use minimum length of tubing possible.
- Flush new cartridge at full flow for three minutes to purge air.
- Replace cartridges when capacity is reached, or when flow becomes too slow, but at least annually.
Made in the USA!

 MSRP: $429.99
Our Price: $ 332.79

(back)

Product ID: EV-9282-00

H-1200 Water Filter system, manufactured by Everpure

Features
- Finely polishes treated water to premium quality for drinking and cooking.
- Reduces chlorine taste and odor, chloramines and other bad tastes and odors.
- Reduces dirt, rust, asbestos fibers, and other particulates such as oxidized iron, manganese, and sulfides.
- Reduces parasitic protozoan cysts such as Giardia, Entamoeba, and Cryptosporidium.
- Adsorbs common earthy, moldy, fishy tastes and odors.
- Reduces lead.
-
 Effectively reduces Volatile Organic Chemicals (VOCs), including Trihalomethanes (THMs).
- Effectively reduces methyl tertiary-butyl ether (MTBE).
- Inhibits limescale buildup in water-using appliances - As tested by KDF Fluid Treatment, Inc.
- KDF Media inhibits microbial growth - As tested by KDF Fluid Treatment, Inc.
- Provides bacteriostatic control with KDF media - as tested by KDF Fluid Treatment, Inc.

Operating Specifications
- Capacity: 1,000 gallons (3,780 L).
- Pressure requirement: 10-125 psi (0.7 - 8.6 bar), non-shock.
- Temperature: 35-100 degrees F (2-38 degrees C).
- Flow Rate: 0.5 gpm (1.9 Lpm).

General Installation Requirements
- Install vertically with cartridge hanging down.
- Use minimum length of tubing possible.
- Flush new cartridges at full flow for three minutes to purge air.
- Replace cartridges when capacity is reached, or when flow becomes too slow, but at least annually.
Made in the USA!

MSRP $679.99

Price: $553.50

(back)

Product ID: EV-9252-66

H-54 Water Filter system, manufactured by Everpure 

Features
- Finely polishes treated water to premium quality for drinking and cooking.
- Reduces chlorine taste and odor.
- Reduces dirt, rust, asbestos fibers, and other particulates such as oxidized iron, manganese, and sulfides.
- Reduces parasitic protozoan cysts such as Giardia, Entamoeba, and Cryptosporidium.
- Adsorbs common earthy, moldy, fishy tastes and odors.
- Reduces lead.
- Inhibits limescale buildup in water-using appliances - As tested by Everpure.


Operating Specifications
- Capacity: 750 gallons (2,839 L).
- Pressure requirement: 10-125 psi (0.7 - 8.6 bar), non-shock.
- Temperature: 35-100 degrees F (2-38 degrees C).
- Flow Rate: 0.5 gpm (1.9 Lpm).

General Installation Requirements
- Space required: 5 x 5 x 20 in. including 2-1/2 inches of clear space under unit for cartridge change.
- Install vertically with cartridge hanging down.
- Use minimum length of tubing possible.
- Flush new cartridge at full flow for three minutes to purge air.
- Replace cartridges when capacity is reached, or when flow becomes too slow, but at least annually.
Made in the USA!

*NOTE* The H-54 system requires that you have a water shutoff valve and a separate faucet for the filtered water. We can supply the faucet but not the valve.

MSRP $359.99

Price: $287.98

(back)

Product ID: EV-9262-70

H-104 Water Filter system, manufactured by Everpure 

Features
- Finely polishes treated water to premium quality for drinking and cooking.
- Reduces chlorine taste and odor.
- Reduces dirt, rust, asbestos fibers, and other particulates such as oxidized iron, manganese, and sulfides.
- Reduces parasitic protozoan cysts such as Giardia, Entamoeba, and Cryptosporidium.
- Adsorbs common earthy, moldy, fishy tastes and odors.
- Reduces lead.
- Inhibits limescale buildup in water-using appliances - As tested by Everpure.


Operating Specifications
- Capacity: 1,000 gallons (3,780 L).
- Pressure requirement: 10-125 psi (0.7 - 8.6 bar), non-shock.
- Temperature: 35-100 degrees F (2-38 degrees C).
- Flow Rate: 0.5 gpm (1.9 Lpm).

General Installation Requirements
- Space required: 5 x 5 x 20 in. including 2-1/2 inches of clear space under unit for cartridge change.
- Install vertically with cartridge hanging down.
- Use minimum length of tubing possible.
- Flush new cartridge at full flow for three minutes to purge air.
- Replace cartridges when capacity is reached, or when flow becomes too slow, but at least annually.
Made in the USA!

MSRP $379.99

Price: $304.00

(back)

Product ID: EV-9273-75

ROM II Water Filter system, manufactured by Everpure 

Description: The ROM II utilizes the S-101 carbon block pre-filter to reduce chlorine tastes and odors and other particulate matter in the water. The system’s Thin Film Composite (TFC) reverse osmosis cartridge then filters the water down to .00001 microns. This method of filtration reduces contaminants such as arsenic, lead, copper, sodium, nitrates, fluoride, cysts and TDS.

The ROM II offers additional features, such as:

  • Reduction of lime and scale build-up in appliances that use water
  • More efficient filtering, which requires less frequent cartridge change
  • Fresh water on demand
  • A lower operating cost that is below the price of bottled water

 The ROM II also:

  • Finely polishes treated water to premium quality for drinking and cooking.
  • Reduces chlorine taste and odor.
  • Reduces dirt, rust, asbestos fibers and other particulates such as oxidized iron, manganese and sulfides.
  • Reduces parasitic protozoan cysts such as Giardia, Entamoeba and Cryptosporidium.
  • Controls even extreme levels of common “off” tastes and odors, including those that are earthy, moldy and fishy.
  • Reduces lead.

The ROM II features a normal production rate of 14.4 gallons per day at a 1/2 gallon per minute flow rate.

Reverse Osmosis Systems
All RO systems work more effectively at higher water pressures.

System comes with a 3 gallon storage tank, Air Gap Faucet, installation kit, and John Guest T.
Made in the USA!

MSRP $699.99

Price: $600.00

(back)

Product ID: EV-9273-75

ROM III Water Filter system, manufactured by Everpure

Description: The ROM III employs the same water filtering capabilities as the ROM II, but adds another level of protection against volatile organic chemicals and MTBE that may exist in the water. This method of filtration also reduces contaminants such as arsenic, lead, copper, sodium, nitrates, fluoride, cysts and TDS.

The ROM III offers additional features, such as:

  • Reduction of lime and scale build-up in appliances that use water
  • More efficient filtering, which requires less frequent cartridge change
  • Fresh water on demand
  • A lower operating cost that is below the price of bottled water

 The ROM III also:

  • Finely polishes treated water to premium quality for drinking and cooking.
  • Reduces chlorine taste and odor.
  • Reduces dirt, rust, asbestos fibers and other particulates such as oxidized iron, manganese and sulfides.
  • Reduces parasitic protozoan cysts such as Giardia, Entamoeba and Cryptosporidium.
  • Controls even extreme levels of common “off” tastes and odors, including those that are earthy, moldy and fishy.
  • Reduces lead.
  • Effectively reduces VOCs, including trihalomethanes (THMs).
  • Effectively reduces methyl tertiary-butyl ether (MTBE).
  • Inhibits limescale build-up in water-using applications.
  • Reduces arsenic, barium, cadmium, chromium, copper, fluoride, lead, nitrate/nitrite, selenium, radium, cysts, sodium, MTBE, VOCs and chloroform.

The ROM III features a normal production rate of 14.4 gallons per day at a .5 gallon per minute flow rate.

Reverse Osmosis Systems
All RO systems work more effectively at higher water pressures.

System comes with a 3 gallon storage tank, Air Gap Faucet, installation kit, and John Guest T.
Made in the USA!

MSRP $799.99

Price: $640.00

(back)

Product ID: EV-9370-00

T-20 Water Filter system, manufactured by Everpure 

Description: All too often, common impurities make ordinary tap water undesirable for cooking, drinking and bathing. Chlorine, sulfur and even metal piping can add unpleasant tastes and odors. A T-20 Filter can easily solve these problems and, at the same time, supply bottled-quality tap water. You'll find meals and beverages will have a truer flavor because your water will be free from the off-tastes and odors which can alter the flavor of prepared foods.

Contaminant Reduction Efficiency
Chlorine
Fishy, musty, earthy tastes & odors 
Visible Particles such as dirt & rust --larger than 40 microns

 

Invisible particles that can make water hazy -- sub-micron to 40 microns

 

Entamoeba histolytica, Giardia lambila cysts 
Asbestos fibers 

T-20 Water Filter Specifications

MICRO-PURE Re-Charge
# 2053
Diameter
8.75 in (22.2 cm)
Height
28.5 in (72.4 cm)
Required Vertical Space
32 in (81.3 cm)
Required Horizontal Space
10 in (25.4 cm)
Pipe Size (Inlet & Outlet)
.75 ln. unions
Maximum Temperature
100°F (38°C)
Filtration Rating
1-2 microns
Pressure - Max.
125 psi (8.8 kg/cm2)
Pressure - Min.
20 psi (1.4 kg/cm2)
Flow Rate
4 gpm
Shipping Weight
21 lb. (9.6 kg)

Made in the USA!
MSRP $1899.99

Price: $1520.00(back)