| . | Standard Specifications | Available Options |
| Frame Construction | Open Top | N/A |
| Frame Material | Hot rolled mild steel with steel-it grey color match paint | Stainless steel with #4 polish |
| Standard Modules | Idle ends, drive ends, 30, 45 & 90 degree turns | Inline transfers, parallel transfers, copes |
| Chain Return | Roller | Serpentine |
| Intermediate Frame Depth | 5 1/2" | 6 1/2" |
| Drive, Idle & Transfer Frame Depth | 8" with end caps | N/A |
| Wearstrips | UHMW Clip-on | N/A |
| Bearings | 2-hole, flange mounted, cast housing | Polymer Housing |
| Guide Rail Brackets | Adjustable slotted steel "L"-brackets | N/A |
| Guide Rails | Arrowglide aluminum with round or flat UHMW profile | Stainless steel channel with round or flat UHMW insert |
| Drive Mount | Shaft/flange mounted – RH or LH | Adjustable below mount |
| Speeds | Fixed at 30, 60, 90, 120 and 150 (motors are inverter-duty) | Compact VFD mounted to drive end, 90 VDC motor with controller |
| Standard Lengths | 1'-0" and 3'-0" idle ends, 3'-0" drive ends, standard turns have 24" radius and 6" tangents | Intermediate sections available in 1" increments from 6" to 10'-0", 18" radius for 3 1/4" curves, 0" tangent on one end of turns |
| Supports | 1/4" x 1 1/2" x 1 1/2" Mild steel with welded cross member and plated mild steel adjustable foot | 2" square tube with threaded rod for adjustment, both styles available in stainless steel |
| Height Range | 27" - 57" +/- 2 " | N/A |
| Shafts | 1" diameter steel with 1/4" keyway | N/A |
| Table Top Chain Widths | 3 1/4", 4 1/2", 7 1/2" 10", 12" and dual 7 1/2" | N/A |
| Chain Types | Straight running | Side flexing |
| Chain Material | Delrin | LF plastic, HP plastic, mild steel, stainless steel |
| Other Options | | Roller deadplates, stainless steel deadplates, 3/4" side transfer deadplates, flush side areas |
